Emblem / Decal

Emblem / Decal

Some of the listed Emblems/ Decals are peel off stick on stickers, however the majority of them are water slide decals. Please se the guide below


Decal Apply Guide


The first stage is to prepare your work area and make sure you have everything to hand:

  • Model
  • Decal
  • Saucer of warm water
  • Tweezers
  • Small scissors
  • Paper towel

Cut out the decal to be applied. 
Clean the surface where the decal is to be applied. It must be dust and grease free.
Place the decal in the water and leave it for 10 to 20 seconds.
Hold it with tweezers so it does not sink to the bottom.

Bring the decal to the model and slide it off the paper onto the designated spot on the model. Use wet finger or tweezers to move the decal onto the model to prevent damage.

Position the decal accordingly and press it down with a paper towel removing all water underneath the decal.

Let the decal dry for about 20-30min and prevent from touching the decal in the future.


Disclaimer: This guide is only a suggestion and not a must, there are many ways to apply water slide decals. We do not guarantee that this is the best way to apply them and suggest to search elsewhere for more detailed instructions.